TEK nozzle holder with hoses
19.90 €
Fitting holder for our TEK nozzles.
The TEK nozzle holder made of aluminium is glued firmly into the aircraft. To do this, drill a 4 mm diameter hole in the rudder or fuselage at the desired location. If there is not enough wall thickness, a piece of plywood must first be used to fill the hole, so that the holder can be glued tightly enough. The TEK nozzle is relatively long, so you have quite a lot of leverage.
The nozzle holder is slightly thicker at one end. This side accommodates the TEK nozzle. Please pay attention to the direction of installation. The nozzle holder is designed in such a way that the nozzle clamps a little and seals well even without a silicone hose. The nozzle is inserted 20 mm into the holder.
The Teflon hose is normally simply inserted into the thinner side of the nozzle holder. It clamps there and is sufficiently tight. The insertion depth is 10 mm. In case of subsequent installation, this saves the problems of having to mount the hose afterwards, because otherwise it would not fit through the hole in the tail unit. If the hose is a little too thick (tolerance), it can simply be lengthened over a short section. If you then cut it again in this area, it will be a little thinner and should fit.
The holder is then cleaned, possibly roughened a little and glued with epoxy (e.g. Endfest 300). The alignment should be as exact as possible in the direction of flight; when mounting on the fuselage, it should be at right angles to the direction of flight. The aluminium tube should protrude about 3 mm to the outside so that the silicone tube can be attached here for sealing.
On the GPS-Logger 2/3 or MicroVario, a piece of silicone hose is attached to the TEK connection as a transition to the Teflon hose.
Specifications:
- Weight: 0,5 g
Scope of delivery:
- TEK aluminium nozzle holder
- 2.5 m Teflon hose
- Silicone hose pieces
Accessories
 |
MicroVario |
54.90 €
|
 |
TEK nozzle angled, 240 mm long |
45.90 €
|
 |
TEK nozzle straight, 120 mm long |
43.90 €
|
Customer reviews
Legal Disclaimer:
- * Our offer is aimed at consumers. Therefore, all prices are inclusive of VAT. and plus shipping costs.
- Images may be similar. For product information, we can assume no liability. Shown accessories are not included. Logos, names and trademarks are the property of their respective owners. Changes, errors and prior sale.
- Videos are included on our pages, which are provided on the video platform YouTube (based in Califormia USA).We use this service to provide our videos on a wide range of end devices and browser versions without loss of quality.If you make use of this offer by clicking on YouTube, u.U.collect personal data.We point out that we as the provider of the pages are not aware of the content of the transmitted data and their use by YouTube.Furthermore, we u.U.set up a connection to the DoubleClick ad network.We also inform you that servers operated by companies in the US are not subject to European privacy policy.For more information, see the YouTube Privacy Policy: https://policies.google.com/privacy?hl=en&gl=en
