Redundancy Bus-35S Stabilisation

incl. 19% VAT excl. shipping to Germany / Deutschland
Article number: 2202.263
Article code: 2202.263

279.90 € Article is in stock - available stock: 7


available stock: 7
Amount pcs




The RB-35S builds on the success of the previous trusted Redundancy Bus series by adding many new features, such as configurable dual power input, dual BEC outputs, overload / current detection, the new ADV stabilizer, etc. The RB-35S system has been designed to meet the needs of users who want the ultimate flight-safe performance and safety for their RC Models.

Triple Receiver Redundancy & Dual Power Input

RB-35/RB-35S has been designed to offer both dual-power and triple-receiver redundancy. This provides the user triple receiver signal and telemetry redundancy by adding multiplex ports (RX1-3 IN / S.Port). Dual-power provides a safe and efficient way to power the system with your power sources connected via a pair of standard XT30 connections.

The dual-power consumption system can operate either in Balance or Backup mode. In Balance Mode (default), it consumes the power line from either power source depending on which has the higher voltage. When switching to the Backup Mode, the system consumes the power line with the priority that the user selected under the set voltage range.

Dual BEC Outputs & Overload Protection & Current Detection

The RB-35/RB-35S includes a built-in Dual BEC, each XT30 output port can be independently configured to provide between 5V to 8.4V output. The unit’s BEC also can change channel output voltage for ports uses VOut1: CH1-9, and VOut2: CH10-24 and the rest ports. All Channel ports are provided with overload protection, and in addition, Channels 1-9 support the current detection function.

Advanced Stabilizer

The RB-35S offers an ADV Stabilizer function which is an upgrade over the original classical gyroscope stabilization modes. The ADV Stabilizer offers an advanced mode that provides more programmable stabilized channels and flexibility.

The classical stabilization mode has been enhanced with 5 additional stabilization channels, providing pin mapping to each channel in the multiple flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge with an airplane model.

In the advanced stabilization mode, all the RB-35S output pins are configurable for stabilization and additional advanced features such as File Sharing, Programmable Parameters, Developer Access, etc.

Diversified Sensor Telemetry

The RB-35/RB-35S also works as an extensive sensor module with various built-in sensors including diversified telemetry. The RB-35S also includes high-precision telemetry sensors for monitoring altitude, vertical speed, etc. can be also used as an alternative to using a GR or S series receiver.

Power Switch Function

The built-in power switch function draws the support of using multiple types of external switches (e.g. NFC switch, Pin Plug, etc.) that enable flexible options on how the power can be switched on/off without the need to plug/unplug the battery connections.

Features:

  • Dual Power Input & Triple Receiver Redundant Guarantee
  • RX In | FBUS/SBUS/S.Port Auto Recognization (Note: Only the S.Port on the RX1 channel port can be used to upgrade firmware.)
  • Built-in Advanced Stabilization Functions
  • Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.)
  • Built-in Power Switch Function | Match with Different External Switches (Optional)
  • Dual Power Input (Balance / Backup mode)
  • Independently Configurable Dual BEC Outputs (BEC 1: VOut1 & CH1-9 | BEC 2: VOut2 & CH10-24 & all other Ports)
  • Overload Protection on Each Channel
  • Channel1-9 with Current Detection
  • Full Black Box Data Record Function
  • Supports External LED Indication

Specifications:

  • Dimension: 114.4*73.4*18.7mm (L*W*H)
  • Weight: 99g
  • Number of Configurable Channel Ports: 24 (PWM/FBUS/S.Port/SBUS Out)
  • 3 RX Input Ports & 1 LED Indicator Port
  • Battery Input Voltage Range: DC7.4-26V (It is recommended to use 3S-6S Li batteries) (Note: 2S Li Batteries will not have sufficient input supply voltage to reach the 8.4V BEC output configuration.)
  • Operating Current: 200mA@12V
  • Continuous Current: 2*15A@5-8.4V (BEC Outputs)
  • Operating Temperature: -20°C~75°C
  • Battery Input & BEC Output Connector: XT30

Note: Since there are no LUA scripts for the configuration of OpenTX yet, the RB switch can currently only be used with the ETHOS operating system!

Please enter your question and we will response immediately

Legal Disclaimer:

  • * Our offer is aimed at consumers. Therefore, all prices are inclusive of VAT. and plus shipping costs.
  • Images may be similar. For product information, we can assume no liability. Shown accessories are not included. Logos, names and trademarks are the property of their respective owners. Changes, errors and prior sale.
  • Videos are included on our pages, which are provided on the video platform YouTube (based in Califormia USA).We use this service to provide our videos on a wide range of end devices and browser versions without loss of quality.If you make use of this offer by clicking on YouTube, u.U.collect personal data.We point out that we as the provider of the pages are not aware of the content of the transmitted data and their use by YouTube.Furthermore, we u.U.set up a connection to the DoubleClick ad network.We also inform you that servers operated by companies in the US are not subject to European privacy policy.For more information, see the YouTube Privacy Policy: https://policies.google.com/privacy?hl=en&gl=en

New Article

TANDEM X20 PRO AW FrSky green transmitter set 2.4Ghz
TANDEM X20 PRO AW FrSky green transmitter set 2.4Ghz
1329.00 €
incl. 19% VAT excl. shipping to Germany / Deutschland Not available
Not available at this time
TANDEM X20 PRO AW FrSky silver transmitter set 2.4Ghz
TANDEM X20 PRO AW FrSky silver transmitter set 2.4Ghz
1329.00 €
incl. 19% VAT excl. shipping to Germany / Deutschland Not available
Not available at this time

Our Model Airplane Shop

Banner
Social Media
Facebook

Newsletter

Shipping and Payment

Lade ...